ok these are the two cams that i have chosen and only will be chosen .ive read till im sick lol so lets get opinons on these two .my mods are in sig with the exception of a ls6 intake i would like to have good street manners mpg doesnt really bother me being a m6.but i do street race some mostly from a stop or a small 15mph roll what would benift me the most for my need .i also dont want to have to shift close to 7k i would feel comfortable at about 6500 or 6600 help me

 

I am pretty sure there is quite a few threads about this..... IMO go with the MS3, great street manner, massive power, and if you decide to spray the car, this cam will be just the one to do it with....

you are going to get split opinions though just to let you know.....

would you rather have a 113 lsa cam or a 112+2 lsa cam? LOL!!!!

 

Sounds like the V2 is for you.

 

Sounds like a prime candidate for the torquer!

 

Ms3 Is A Good Cam And With The Right Tune Its Plenty Streetable As On Now Mine Is Good But My Tune Is A Little Off So My Driveablity Is Not The Best (but Still Pretty Good And Will Improve Once I Get The Tne Down)

But In Anycase I Wouldent Hesitate To Go Big It Makes Good Power And You Can Shift It At 6600 And Make Great Power Just Maek Sure You Fine A Really Capible Tuner But Id Thik That To Be The Case With Any Cam

 

I presume English isn't your first language????

 

LOL

id go V2, which i did actually. you wont have to rev the snot out of her to get the power...goodluck.

 

Definately Torquer 2. Mine peaks at 6300 rpm. The MS3 will want you to spin a bit higher with the added duration. The Torquer 2 should have more low end as well. Still sounds pretty mean too.

 

not to get too far off topic but out of curiousity, what kinda numbers did you put down??

 

+1 for the MS3

 

https://ls1tech.com/forums/showpost....7&postcount=24

I dont want to give out exact numbers since this dyno was rather unflattering. It was an AWD dynojet that was putting up numbers closer to a Mustang Dyno.

 

im guessing you made around 430rwhp.

 

Okay okay, here the numbers are:

409 RWHP, 376 RWTq

For comparison:
F-13 cam only car pulled 357/348 (previously pulled 400 flat elsewhere)
A 230/236 + LS6 heads car made 375/369
A 5# supercharged car did 411/382
Stock cars were making between 278 and 290 HP.
An intake/exhaust/TB/HPTuners car did 317 (previously dynoed 317 stock elsewhere)

 

wow...yeah id say something is up there...i hate dynos.

 

I wouldn't leave the F14 out of the picture.

 

check my sig....

 

Just To Throw Some Numbers Out Here My Ms3 Cammed Prc Head Car Did 400rwhp On A Stock Tune With A 14:1 A\f And A Unlocked 3500 Stall Converter Bulit 10bolt And Steel Driveshaft 3.73 GEARS AND 17X 11 RIMS

Although I Dont Have Any Updated Numbers Since The Tune, Injectors, And Fast Intake Yet Id Put Good Money Im In The 420-430rwhp Range (unlocked)
AND MABYE CLOSE TO 450 LOCKED UP

 

just to throw something out there......i ran my friends MS3 cam only SS to my F13'd Z28 and i actually pulled on him all the way to 100. By 100 he started to creep back but was still a fender back by 140ish.....

Both equal drivers. I was on a nitrous tune (380rwhp) but weigh a bit less than him, and he put down 410 to the tires.

 

Dude, you live on long island. Go to vette dr's ECS, TTP, eastside/Don or whatever and get dyno tune from a regular shop.

 

Both those cams are too big for street w/ stock 98 heads