cam question for Victor Jr. carb intake
#1
On The Tree
Thread Starter
iTrader: (13)
Join Date: Dec 2005
Location: Northen California
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
cam question for Victor Jr. carb intake
I have a 2002 LS6 engine with a Victor Jr. carb intake. I see a few opinions about different LSA numbers for this type of application. Can anybody tell how the ASA cam would work with this combination as opposed to just running the factory LS6 cam already installed? The only other modifications would be a header upgrade. If neither of these cams are well suited to the carb application, any suggestions of available grinds or vendors who might have a cam better suited for the rpm range of the stock LS6 long block? Thanks for having a look at this. Mac
#2
Launching!
iTrader: (51)
Join Date: Feb 2006
Location: Port Orange/Daytona,Fl
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by under pressure
I have a 2002 LS6 engine with a Victor Jr. carb intake. I see a few opinions about different LSA numbers for this type of application. Can anybody tell how the ASA cam would work with this combination as opposed to just running the factory LS6 cam already installed? The only other modifications would be a header upgrade. If neither of these cams are well suited to the carb application, any suggestions of available grinds or vendors who might have a cam better suited for the rpm range of the stock LS6 long block? Thanks for having a look at this. Mac