MS4 + LS6 heads
TECH Addict
Joined: Jun 2005
Posts: 2,660
Likes: 14
From: England
I've not seen any yet, but a lot say they have just ordered it. I think TSP posted some numbers for a LS2 with that setup.
I would expect 440+rwhp with a resonable spread across the powerband. Not the ultimate, but it's fantastc $/HP
I would expect 440+rwhp with a resonable spread across the powerband. Not the ultimate, but it's fantastc $/HP
I've seen where a few people on here have oredered this setup, I doubt any of them are done with the install yet. I would also like to know the results as I plan to order this sometime this summer. this looks like a one of the better bang for the buck setups
damn 300bhp beat me to it
damn 300bhp beat me to it
On The Tree
Joined: Dec 2005
Posts: 122
Likes: 0
From: Tomball, Tx
Just got off of the phone with Brian @ TSP. He said my heads should be ready no later than the beginning of next week and everything will be on the way to me. I should have the shortblock back today or tommorrow so when I get my stuff in it should only be a few days till it's up and running. That is the MS4 and PRC CNC Ported LS6 heads.
Chris
Chris
I should be receiving my MS4 package next monday. I'll be running it on a totally stock motor with LT's and catback. It dyno'd at 333rwhp/334rwtq with those two, so I will post the gains with the cam alone on a stock motor. So far I think most everyone else with the MS4 is doing heads too, this ought to be a good test of the cams original claims against a stock motor.
I'm sure the numbers will be very good considering the development of this cam was semi-based around the ported heads they offer. I'm very eager to see what the ms4 cam does with the heads...I would imagine the torque numbers will be higher than previous cams of similar size.
Originally Posted by lt1formula2000
I've seen where a few people on here have oredered this setup, I doubt any of them are done with the install yet. I would also like to know the results as I plan to order this sometime this summer. this looks like a one of the better bang for the buck setups
damn 300bhp beat me to it
damn 300bhp beat me to it
With a LS2/Fast 90 and TSP long tubes. Last edited by JoeyGC5; Jun 22, 2006 at 01:23 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
