AZPS 03 Cam
Originally Posted by c5_ls1_6spd
AZPS 03 Cam - what are the cam specs on this cam??
AZPS 02 Cam - what are the cam specs on this cam??
AZPS 02 Cam - what are the cam specs on this cam??
Originally Posted by RM99Z
Hmm...bet it performs like a magic stick 3...
i read what kind of numbers the ASPZ 03 cam was putting out and i wasn't going to order the ASPZ 03 w/o knowing the specs.........
I absolutely hate when shops are secretive about their cam grinds.
Originally Posted by RM99Z
Hmm...bet it performs like a magic stick 3...
it's also close to a G5X3 too.....
why is it that the G3X3 makes less torque under the curve when compared with similar cams, such as the MS3 and AZPS 03?
Last edited by c5_ls1_6spd; Jun 28, 2006 at 05:00 PM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by RM99Z
Hmm...bet it performs like a magic stick 3...
Originally Posted by just-a-z
235/242 600/610 112 is what i have been told
Originally Posted by GasTiresandOil
Actually they are very similar to the HPE S-Cam just on a narrower split. 
Originally Posted by c5_ls1_6spd
it's also close to a G5X3 too.....
why is it that the G3X3 makes less torque under the curve when compared with similar cams, such as the MS3 and AZPS 03?
why is it that the G3X3 makes less torque under the curve when compared with similar cams, such as the MS3 and AZPS 03?
Banned
Joined: May 2006
Posts: 421
Likes: 0
Originally Posted by lilbuddy1587
I'll bet it doesnt
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
He really knows his ****!
Originally Posted by lilbuddy1587
I'll bet it doesnt
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
Banned
Joined: Nov 2005
Posts: 456
Likes: 0
Originally Posted by just-a-z
235/242 600/610 112 is what i have been told
AZP&S make some sick cams, they make great #'s and track times IMO. As far as getting the specs call Mike, if he wants to tell you he will but I doubt he will. Their cams are some of the best out there right now, if you made a custom grind cam that was doing so well would you want to give out the specs? I don't think you would. They are proven to be great cams, if you want to buy it then buy it. Of couse they sell it only if they install and tune it, which I agree since it cuts out installer/tuner error.
Teching In
Joined: Dec 2005
Posts: 17
Likes: 0
From: Cave Creek, Arizona
Originally Posted by SVT THIS
Does AZPS have a website? I've never heard of them but would like to check out their products. PM me if not a sponsor.
Originally Posted by lilbuddy1587
I'll bet it doesnt
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
Wrong again there buddy
Again, WRONG.
The x3 will make more power under the curve compaired to the ms3 but it wont be by much. I went from an x3 on a 112 to a azps03 and picked up power EVERYWHERE. As far as the cam specs being secret, get over it. If you dont like it, take it up with Ed Curtis or EDC on this board.
Why didn't you come to me sooner
i ordered my MS3 last week and received it last thursday, but i haven't put it in my car yet, because im still waiting on my heads to come in. would it be wise to abandon the MS3 and just get the AZPS 03 cam? would the AZPS 03 be available on a 114LSA?
Originally Posted by 05_GTO
Wrong
AZP&S make some sick cams, they make great #'s and track times IMO. As far as getting the specs call Mike, if he wants to tell you he will but I doubt he will. Their cams are some of the best out there right now, if you made a custom grind cam that was doing so well would you want to give out the specs? I don't think you would. They are proven to be great cams, if you want to buy it then buy it. Of couse they sell it only if they install and tune it, which I agree since it cuts out installer/tuner error.
AZP&S make some sick cams, they make great #'s and track times IMO. As far as getting the specs call Mike, if he wants to tell you he will but I doubt he will. Their cams are some of the best out there right now, if you made a custom grind cam that was doing so well would you want to give out the specs? I don't think you would. They are proven to be great cams, if you want to buy it then buy it. Of couse they sell it only if they install and tune it, which I agree since it cuts out installer/tuner error.
damn, just when i had my mind set on the azps 03 cam.........im in texas, well i guess i'll just stick with my MS3 cam.