Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

CheatR question

Thread Tools
 
Search this Thread
 
Old 07-05-2006, 03:33 PM
  #1  
On The Tree
Thread Starter
iTrader: (3)
 
LS1T/A4's Avatar
 
Join Date: Nov 2005
Location: Jax, FL
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default CheatR question

Here are my plans for my Camaro:

Fuddle stall (whatever stall speed Fuddle recommends)
DMH Cutout
SLP Lid
LS6 Intake Mani
HP Tuners
and CheatR cam

I want to run mid 12s or faster, ~350hp 350ft/lbs and keep the car daily driven. Will the CheatR cam be enough?

Thanks
Old 07-05-2006, 03:59 PM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,245
Likes: 0
Received 32 Likes on 28 Posts

Default

Originally Posted by LS1T/A4
Here are my plans for my Camaro:

Fuddle stall (whatever stall speed Fuddle recommends)
DMH Cutout
SLP Lid
LS6 Intake Mani
HP Tuners
and CheatR cam

I want to run mid 12s or faster, ~350hp 350ft/lbs and keep the car daily driven. Will the CheatR cam be enough?

Thanks
You can run mid 12s with just the converter. The LS6 manifold, CheaTR cam and tuning will just make it easier. 350rwhp should be achievable with those mods.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Old 07-05-2006, 04:40 PM
  #3  
On The Tree
Thread Starter
iTrader: (3)
 
LS1T/A4's Avatar
 
Join Date: Nov 2005
Location: Jax, FL
Posts: 156
Likes: 0
Received 0 Likes on 0 Posts
Default

Sweet, I want to go against the grain with this car and make it a "sleeper". Another question, how hard is the CheaTR on springs? I would like to get long life out of the springs if possible.




All times are GMT -5. The time now is 10:54 PM.