Who's got this set-up?....or similiar?...what PR?
07-30-2006 | 08:04 PM
#1
Thread Starter
TECH Apprentice
Joined: May 2006
Posts: 308
Likes: 0
From: Nebraska
Who's got this set-up?....or similiar?...what PR? Guys,
Does anyone have a set-up like this?....
408 iron block/forged crank & rods
LS6 heads (243s milled down to 62cc/.015), CNC'd by Patriot
-15 dish Diamond pistons
.051 cometic gaskets
Comp Cams 875-16 lifters
Patriot dual .650 lift springs
Torquer 2 cam (.595/.598 lift @.050) LSA 113 + 2
1.7 roller rockers
I'm getting ready to drop this engine in....but...would like to know what PR length everyone else is using...... I measured 7.275 with my adjustable, but feel that the lifters are skewing the results.
Stroker2112
Does anyone have a set-up like this?....
408 iron block/forged crank & rods
LS6 heads (243s milled down to 62cc/.015), CNC'd by Patriot
-15 dish Diamond pistons
.051 cometic gaskets
Comp Cams 875-16 lifters
Patriot dual .650 lift springs
Torquer 2 cam (.595/.598 lift @.050) LSA 113 + 2
1.7 roller rockers
I'm getting ready to drop this engine in....but...would like to know what PR length everyone else is using...... I measured 7.275 with my adjustable, but feel that the lifters are skewing the results.
Stroker2112