Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Heads for around 1000-1500?

Thread Tools
 
Search this Thread
 
Old 08-03-2006 | 08:48 PM
  #1  
Blue02Ws6's Avatar
Thread Starter
TECH Apprentice
iTrader: (3)
 
Joined: Aug 2002
Posts: 397
Likes: 0
From: Louisiana
Default Heads for around 1000-1500?

I have been looking and see that Patriot has their's for 1095 but I have searched and a lot of people like PRC's. PRC has the 5.3 stage 2.5's for 1200 or so and the LS6 with stock valves or the PRC stage 2 Dart heads. I have a relative small cam 227/227 .564 right now but might go bigger. Which set of heads would you guys get if a grand was burning a hole in your pocket?
Old 08-03-2006 | 09:04 PM
  #2  
madmaxz's Avatar
On The Tree
iTrader: (7)
 
Joined: Dec 2005
Posts: 120
Likes: 0
From: Baltimore, Maryland
Default

TSP/PRC stage2 ls6 if you go with a bigger cam
Old 08-03-2006 | 09:10 PM
  #3  
Blue02Ws6's Avatar
Thread Starter
TECH Apprentice
iTrader: (3)
 
Joined: Aug 2002
Posts: 397
Likes: 0
From: Louisiana
Default

Originally Posted by madmaxz
TSP/PRC stage2 ls6 if you go with a bigger cam
That's the Dart head? or just the PRC Ls6 head for $999? I haven't seen a S2 LS6 on Texas speed website.
Old 08-03-2006 | 09:11 PM
  #4  
n2o junkee's Avatar
On The Tree
iTrader: (-1)
 
Joined: Mar 2005
Posts: 163
Likes: 0
Default

I have a set of bad *** l1s stage 2 full port and polish heads from west coast racing heads. you can check them out they are a sponsor on here and do really good work. I just had them freshened up and new valve springs retainers and locks were put on these heads gave me 35rwhp over my old stockers.I will let them go for $1000.00 shipped.
Old 08-03-2006 | 09:19 PM
  #5  
ArcticZ28's Avatar
TECH Senior Member
20 Year Member
iTrader: (14)
 
Joined: Jun 2004
Posts: 5,125
Likes: 4
From: Alexandria, VA
Default

TSP's got a deal on new 243 castings CNC'ed for under 1k.
Old 08-04-2006 | 12:44 AM
  #6  
Jorge Olmos's Avatar
Teching In
 
Joined: Jul 2006
Posts: 28
Likes: 0
Default

Originally Posted by n2o junkee
I have a set of bad *** l1s stage 2 full port and polish heads from west coast racing heads. you can check them out they are a sponsor on here and do really good work. I just had them freshened up and new valve springs retainers and locks were put on these heads gave me 35rwhp over my old stockers.I will let them go for $1000.00 shipped.
you live in Van Nuys ha
Im out of North Hills
you have a wild set up
Old 08-04-2006 | 12:49 AM
  #7  
RoastEmSS's Avatar
12 Second Club

 
Joined: Jun 2005
Posts: 1,275
Likes: 0
From: Kansas City, MO
Default

Prc Ls6
Old 08-04-2006 | 01:10 AM
  #8  
Blue02Ws6's Avatar
Thread Starter
TECH Apprentice
iTrader: (3)
 
Joined: Aug 2002
Posts: 397
Likes: 0
From: Louisiana
Default

I think I am going to bite the bullet and get the PRC 200cc terminator heads along with a fast 90/90 and MS3.
Old 08-04-2006 | 08:40 AM
  #9  
GuitsBoy's Avatar
TECH Senior Member
iTrader: (4)
 
Joined: Apr 2003
Posts: 6,249
Likes: 3
From: Long Island, NY
Default

Im gonna say the patriot stage 2 ls6 style heads for 1100 are going to be the best bang for the buck. The PRCs are also great heads, but I dont think youll gain much if anything from the patriots, and plus gunnar really stands behind his product. The boys from TSP do stand behind the PRC heads, but gunnar from patriot constantly goes the extra mile and then some.

Last edited by GuitsBoy; 08-04-2006 at 08:55 AM.
Old 08-04-2006 | 08:52 AM
  #10  
Gunnar@Patriot's Avatar
FormerVendor
iTrader: (20)
 
Joined: Jul 2004
Posts: 1,416
Likes: 0
Default

we can do you a set of CNC ported new 243 castings with 2.00"/1.55" oem valves and our Patriot Gold dual spring kit for $995.00 per paiur assembled. These are a great buy and will perform very well.
Old 08-04-2006 | 10:46 AM
  #11  
HartAttack's Avatar
TECH Enthusiast

iTrader: (8)
 
Joined: Aug 2004
Posts: 718
Likes: 0
From: Las Vegas
Default

Originally Posted by Gunnar@Patriot
we can do you a set of CNC ported new 243 castings with 2.00"/1.55" oem valves and our Patriot Gold dual spring kit for $995.00 per paiur assembled. These are a great buy and will perform very well.
i second that! Gunner has the best customer service i have yet to encounter.
product looks great and performs very well.

here is a link to my post about there heads with pictures.


https://ls1tech.com/forums/showthrea...=patriot+heads
Old 08-04-2006 | 11:06 AM
  #12  
Zick's Avatar
TECH Addict
iTrader: (18)
 
Joined: Jun 2004
Posts: 2,247
Likes: 0
From: WI
Default

Originally Posted by HartAttack
i second that! Gunner has the best customer service i have yet to encounter.
product looks great and performs very well.

here is a link to my post about there heads with pictures.


https://ls1tech.com/forums/showthrea...=patriot+heads
+3
Old 08-04-2006 | 12:10 PM
  #13  
TA TECH's Avatar
11 Second Club
iTrader: (8)
 
Joined: Aug 2004
Posts: 503
Likes: 1
From: Under a hood in Alabama
Default

Prc and patriot are both great, i've dealt with both and ya can't go wrong with patriot they are a great product for the money!The 59cc LS6 style are the best for the money!




All times are GMT -5. The time now is 07:13 AM.