As if you had bought a brand new set of 2.04 valved heads the valves wouldn't have hit with that ridiculous cam you just had to have. But you wanted that "chop". And cause they didn't properly notch the pistons (to be expected from a guy who couldn't even install a set of front shocks on an Fbody) you got that "chop", problem is it was the valves "chopping" into the pistons.

PS Those used heads didn't need to be gone over or cleaned up.

PPS You took your car to have work done to a shop where the shop owner's car ran 12.5s on motor and 11.3s on the hit with a 396 H/C LS1 stroker at his own track rental. Oh and let's not forget it dynoed a whopping 350 to the wheels. That should have clued you in.

PPPS If that shop was a sponsor on this site, those posts would also have been deleted.

 

Don't mean to interupt Mr. Drunken on his rant and rave but what exactly does it mean when a motor is M-I-L-K, Milk by definition can be many things like: a white nutritious liquid secreted by mammals and used as food by human beings or in your case maybe: exploit as much as possible; "I am milking this for all it's worth" or To take full advantage of a profitable situation often without regard to the interests of others. These are all web definitions look it up.... might be a small point in all this but reading what you wrote to me says your motor was smooth and running nice. , just here lurking in the background don't mind me. I know this might be a little---- ---- but someone had to say it....

 

ITS Stock.. milk as in my oil was completely milky. White-ish colored muddy textured oil. And the oil had 4 miles on it.

Also.. Pitbull had claimed his transmission was messed up and thats why it rain a shitty time.

Anyways. I am not gonna keep bashing the company (if thats what you want to call it).

 

So how was the service at ARH, was the turn aroudn time good on the TD's?

 

I would sue them. Get a full list of what is wrong with the car at 1-2 different speed shops, and make full lists. What the parts costed you AND labor. Talk to a lawyer. They will probably be in a pinch, and end up refunding you quite a bit. I mean, if they claim to have done something, you paid for it, and they didn't, then you do need to take action against them.

You also might want to provide before and after pictures of the car's hood and strut tower if you have them.

 

TheBlackMamba.. you are right.

I am considering this course of action since the company has stuped to very low levels and has gone so far as being childish with their lies.

I am going to contact a lawyer as soon as the car gets back together. One nightmare at a time.

 

I agree Steve....Pitbull is shamefull for doing what they did....

Hope all works out for ya brother....

 

Lq9 Ported Heads 2.02 And 1.60 Valves
Flow 314 Cfm @ .600 Lift
Lunati Custum Grind Cam 243/252 .612/.612 W/1.75 Rocker
Cam Will Be A Little Smaller With A 1.7 Rocker.
On A 395 Cid Motor In A 3560 Lbs. Car With A Small Dry Shot Of Nitrous This Combo Went 9.53
Also Includes Comp Cam Chromoly Pushrods

$1350

 

that combo did NOT go 9's at all.

His car NEVER EVER saw 9's.

 

Supposedly, and I say supposedly cause the owner of the car told me this personally, it never even seen the track. Well, except for that time it ran 12.5s on muscle and 11.3s on tha small dry shot.

 

yeah but he has NO problem saying he ran 9's.. and I know.. he told me the same thing. I had to hold the **** in from leaking out of me while laughing so hard

 

He might be taking about the 1/8 mile

 

Ls1 Howto Ftw!!!

 

I hate to say this, but what in the hell were you thinking using a shop called "Pitbull Performance?" That just sounds like some low rent jack leg bullshit to me.. I know how it feels to get screwed and ripped off by a performance shop and you should definitely take legal action if possible. Goodluck!

 

Thats intelligent, you and the M-I-L-K-M-A-N make a great couple when it comes to intelligence. I can't possibly see where you get "low rent jack leg bull ****" as a first impression from a shop named Pitbull Performance. But then again your from the south, the sun must be baking your brain.

 

eh the name is just a name. But maybe if you seen the two people running the shop.. you would get the impression the place is a dive. I should have known.

 

That just goes to show how childish and stupid you really are. Ever here the saying" Don't judge a book by its cover." So, if you met Grumpy Jenkins on the street you would just think he's some short fat guy that doesn't no anything. : Thats like saying all women have no clue when it comes to cars, when actually the ones that are actively part of any motorsport would blow you away when it comes to the knowledge they have. Oh yeah, do you own a shop? At least he had the ***** to actually go ahead with his dream and open one.

 

lol its stock.. funny you should mention it.. do I own a shop? No. Why would I? I am not a mechanic. But from the likes of this gentleman's work.. either is he.

As for females not knowing what they are doing.. I never said that... NIKOLE.

 

I knew eventually Steve and Nikole would join up in this arguement.

 

Funny, I'm not Nikole.... and this is not Steve either......for a corrections officer your not very correct.