Please Help!!! Block Specs Needed!!

Reply Subscribe

Thread Tools

Search this Thread

Aug 17, 2006 | 11:07 PM

camSSaro

Thread Starter

Staging Lane

Joined: May 2006

Posts: 76

Likes: 0

Please Help!!! Block Specs Needed!!

I am in desperate need of the cam journal specifications on the ls1 blocks. There is a possibility that mine have been ruined due to a cam bearing coming completely detached from the block while running. All information regarding this will be greatly appreciated. Any machining guru's out there?
P.S I have tried a chevrolet dealership and have got very little cooperation from them

thanks again, Corey

Aug 18, 2006 | 12:08 PM

mmmchickenboy

On The Tree

Joined: Mar 2005

Posts: 146

Likes: 0

have you tried an auto machine shop? they usually have access to that information.

Aug 18, 2006 | 12:25 PM

jrp

SN95 Director

iTrader: (16)

Joined: Jul 2003

Posts: 10,755

Likes: 7

From: Valencia, Ca

https://ls1tech.com/forums/showpost....6&postcount=27

Aug 18, 2006 | 12:25 PM

Slo_240sx

TECH Enthusiast

iTrader: (17)

Joined: Sep 2005

Posts: 619

Likes: 0

From: Detroit, MI - Camp Pendleton, CA

Camshaft bearing journal run out should not exceed .025mm (.0010)
Camshaft bearing journal Diameter- 54.99 - 55.04mm (2.164 -2.166in)
If camshaft is less than spec it needs to be should be replaced.
-Alex

Aug 18, 2006 | 08:02 PM

camSSaro

Thread Starter

Staging Lane

Joined: May 2006

Posts: 76

Likes: 0

Perfect.The motors is actually at a machine shop getting put together but first he wants to check that and cant seem to come across the information

Thanks

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last