AFR large bore 225's on a stock bore ls6?
08-21-2006, 10:20 PM
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Jun 2006
Location: Spivey Kansas
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
AFR large bore 225's on a stock bore ls6? Will AFR 225's (#1630-72cc) work on a stock bore ls6 block? I have the opportunity to pick these up and was wondering if they will work and if there are any issues with valve clearance with stock pistons. I am adding a p-series procharger, fast intake, 90mm TB, comp cams 224-230 581-588, and slp long headers. Thanks Ken
Last edited by KSrebuilder; 08-21-2006 at 10:23 PM. Reason: addition
08-21-2006, 11:46 PM
#2
That's what I would run if I was going forced induction on a 346.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
08-22-2006, 12:12 AM
#3
Originally Posted by Patrick G
That's what I would run if I was going forced induction on a 346.
https://ls1tech.com/forums/dynamometer-results-comparisons/493976-stock-346-c5-puts-down-647-583-thru-a4.html
Hope this helps...
Tony
