don't bother emailing TSP, call them. I've had absolutley zero luck with email, and i've tried several times. Since they're brand new, you shouldn't have a problem getting the issue resolved. As long as they weren't an ebay purchase or anything.

 

Might as well step up to st2 or 3 while you are at it

 

I called tsp, they said that they have changed the castings since i orderd my heads, and there now welding the spot where mine broke on all there heads. So there going to exchange the head for a new casting.

 

A new set of heads is the least of your worries. Check out the cylinder(s) and make sure nothing got scarred.

 

This is Very True ,I would do the same thing.The heads have to come off anyway your pretty much allready in there...I hope there is no Damage.Your luck is like mine (When it rains It Poors)

 

that metal looks really really thin.. if that's from the porting.. that really worries me about the intregreity of hogged out heads. This is the first time I've seen that, but 'm willing to bet that there's other people that have had the same thign happen, we just haven't heard about it.

 

Well the way my luck is going there might be some dammage. But i hope for the best.

When i was on the phone with tsp they said that this has happend before, but its extremely rare. Thats y they started welding it.

 

started welding what?

 

WOW, sorry to see that. The 243 casting get real thin there, seen this happen befor. Hope every thing else is ok.

 

Well i guess the started welding around the stud that i broke because its the weak link. Hopefully it works this time.

 

oof... that's not good. I don't think I'd be putting another set of those on the car, if they give you a new set after your troubles, I'dsell them off quick and start looking into something that's a little more aimed for your purposes at this point.

 

dude that sucks... btw.. nice car... looks like i have a twinner haha

 

stupid joe trapping 117 in my old z06 ---STOCK with catback!