Stock crank
1200 at the flywheel for the crank.
About 500rwhp is the max I would take the stock hypereutectic pistons.
Rod bolts are always a good idea. They are a rather weak link in the bottom end. Rods are good to around 550-650rwhp.
About 500rwhp is the max I would take the stock hypereutectic pistons.
Rod bolts are always a good idea. They are a rather weak link in the bottom end. Rods are good to around 550-650rwhp.
Originally Posted by orangeapeel
1200 at the flywheel for the crank.
About 500rwhp is the max I would take the stock hypereutectic pistons.
Rod bolts are always a good idea. They are a rather weak link in the bottom end. Rods are good to around 550-650rwhp.
About 500rwhp is the max I would take the stock hypereutectic pistons.
Rod bolts are always a good idea. They are a rather weak link in the bottom end. Rods are good to around 550-650rwhp.
good rough estimates here.
