Bucking problems....
#1
On The Tree
Thread Starter
Join Date: Nov 2001
Location: Waco, TX
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I know this is not a Stang board, but yall probably can help out better that most.
Basically my car seems fine under light acceleration but stumbles at a certain point and is a dog when hammered. I have checked the plugs, changed the cap and rotor, fuel filter, ran injector cleaner. FP pressure reads ~39 with the vacuum on and off. And she surges sometimes. So there is a leak somewhere? This is driving me nuts, I have posted on like 6 different boards looking for answers... <img src="images/icons/frown.gif" border="0">
BTW - the car is a 91 5.0 with all mods minus power adder.
Ls1 posts with background info:
part 1
part 2
[ November 19, 2001: Message edited by: STANG PIE ]</p>
Basically my car seems fine under light acceleration but stumbles at a certain point and is a dog when hammered. I have checked the plugs, changed the cap and rotor, fuel filter, ran injector cleaner. FP pressure reads ~39 with the vacuum on and off. And she surges sometimes. So there is a leak somewhere? This is driving me nuts, I have posted on like 6 different boards looking for answers... <img src="images/icons/frown.gif" border="0">
BTW - the car is a 91 5.0 with all mods minus power adder.
Ls1 posts with background info:
part 1
part 2
[ November 19, 2001: Message edited by: STANG PIE ]</p>
#2
LSX Mechanic
iTrader: (89)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Got a timing light handy?? Check your timing....
Could be a screwy distributor maybe....
Have you tried www.corral.net ?
Good luck
Could be a screwy distributor maybe....
Have you tried www.corral.net ?
Good luck
#3
On The Tree
Thread Starter
Join Date: Nov 2001
Location: Waco, TX
Posts: 107
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I am planning on checking the timing and TPS tomorrow. I have posted on all the mustang boards and get more help on F-body boards lol. Damn stang drivers!