CF valve cover ????
Thread Starter
Launching!
Joined: Jan 2003
Posts: 208
Likes: 0
From: AheadofU NY
CF valve cover ???? anyone ever use these? I am not big on CF but I hate the stock covers, thanks!
http://www.scootersperformance.com/carbonvc.htm
http://www.scootersperformance.com/carbonvc.htm
Thread Starter
Launching!
Joined: Jan 2003
Posts: 208
Likes: 0
From: AheadofU NY
CF is bliny for me and usually a rip for small pieces. I used to race boats and one layer in a 36' x 10 catamaran Skater was 5,000 extra. Grant not finished or exposed bt still not the prices I see for a door handle cover or some other crap. I was going to buys some Katech aluminim covers for onlt a little less.
The cost
well, it could be my birthday present 
Thanks for the link!
The cost
well, it could be my birthday present Thanks for the link!
I think there will be an issue with F-bodies. I installed TFS 0.5" valve cover spacers because the stock valve cover would not clear the CC roller rockers. With these spacers, there is insufficient room for the coil pack on the pass side. I have only the front bolt in on this coil pack. Also, the spark wires are pulled tight.
The CF valve covers are 0.75" taller, 1/4" more than my 1/2" spacers.
But, I love the looks, I wish they were no more than 1/2" taller than factory.
The CF valve covers are 0.75" taller, 1/4" more than my 1/2" spacers.
But, I love the looks, I wish they were no more than 1/2" taller than factory.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo I think there will be an issue with F-bodies. I installed TFS 0.5" valve cover spacers because the stock valve cover would not clear the CC roller rockers. With these spacers, there is insufficient room for the coil pack on the pass side. I have only the front bolt in on this coil pack. Also, the spark wires are pulled tight.
The CF valve covers are 0.75" taller, 1/4" more than my 1/2" spacers.
But, I love the looks, I wish they were no more than 1/2" taller than factory.
The CF valve covers are 0.75" taller, 1/4" more than my 1/2" spacers.
But, I love the looks, I wish they were no more than 1/2" taller than factory.
They're slightly longer.
