Im going to install an underdrive pulley on my 2002 SS ,can anyone give me an idea on what to expect or any short cuts I can take.I did a search on the subject but couldnt find info on install,what tools am I going to need,please help. THANKS

 

awesome install page here and tells you what tools and stuff you need! i'm doing mine this weekend woo <img src="images/icons/grin.gif" border="0">
http://www.ebbsnflows.cz28.com/photo4.html

[ November 29, 2001: Message edited by: ExtremeZ28 ]</p>

 

Good info!!! Thanks.

 

no problem <img src="images/icons/wink.gif" border="0">

 

Thanks for info,but what does tighten 37ft lbs then turn 120 degrees

 

[quote]Originally posted by Red Raider:
<strong>Thanks for info,but what does tighten 37ft lbs then turn 120 degrees</strong><hr></blockquote>

You have to tighten the NEW crank bolt to 37lb-ft and then turn the bolt another 120 degrees. For the second part, you will need a torque angle meter or a protractor.

Jason

 

That site was excatly what I was looking for! Thanks to whomever posted it and whomever wrote it! <img src="images/icons/grin.gif" border="0">

 

Can you just use an impact to install the pulley?say a 1/2 in drive,just torque it down with the impact?