Need a little help...
What should my 02s read at Idle?
I also noticed my Fuel trims are at 0, which I though was weird with all my mods, heads/cam. I'm using the old DOS Autotap version, so I might upgrade and see if this clears up this problem?
Matt
[ December 05, 2001: Message edited by: Sporadic ]</p>
B1=front o2s
B2=rear o2s
S1=driver's side
S2=passenger side
O2s may have crapped out if they get contaminated you running rich?
B2 = Bank 2 (passenger side)
S1 = Sensor 1
S2 = Sensor 2
So the sensors to monitor are B1S1 & B2S1 for pre-cat.
<strong>B1 = Bank 1 (driver side)
B2 = Bank 2 (passenger side)
S1 = Sensor 1
S2 = Sensor 2
So the sensors to monitor are B1S1 & B2S1 for pre-cat.</strong><hr></blockquote>
Yep, thats the way I understood it too.
And I also verified by pulling the sensor, B1 = driver side, B2 = passenger side.
Thanks guys.
Matt
Trending Topics
P0135 & P0155 - 02 Sensor Heater Circuit Malfunction (Fronts)
P0140 & P0160 - 02 Sensor Circuit No Activity Detected (Rear 02 sims)
Ok, what in the he!! is going on. Could I possibly have a short somewhere causing this crap. Anyone know the voltages of each wire in the harness so I can test?
Any ideas?
Matt
[ December 13, 2001: Message edited by: Sporadic ]</p>
The Best V8 Stories One Small Block at Time



