Video of the 422 on the rollers.
Re: Video of the 422 on the rollers. Hey Big Mike, PaiN is still too damn modest.
The car pulled 504 rwhp sae corrected pushing a 12-bolt rearend and on ET Streets at 14 psi
So much for the popular "dyno tricks" huh? hahaha
That car is scary. Can't wait to see it run!
The car pulled 504 rwhp sae corrected pushing a 12-bolt rearend and on ET Streets at 14 psi
So much for the popular "dyno tricks" huh? hahaha
That car is scary. Can't wait to see it run!
TECH Fanatic
Joined: Nov 2001
Posts: 1,347
Likes: 1
From: Freeland, MD
Re: Video of the 422 on the rollers. I couldn't stick around to watch this monster run on the dyno, but did get to hear it idle earlier. One very impressive car, to say the least. 504 RWHP, on a 12 bolt, through an auto. Yowsa!! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
11 Second Club
Joined: Nov 2001
Posts: 411
Likes: 0
From: loretteville pq. MARS
Re: Video of the 422 on the rollers. TOTALLY INSANE!!! Congratulations <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0">
Re: Video of the 422 on the rollers. That is insane 504rwhp on ET Street at 12psi? MAN! there might be a bit more power left in it <img src="images/icons/shocked.gif" border="0">
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Launching!
Joined: Nov 2001
Posts: 268
Likes: 0
From: Monterey Park, CA
Re: Video of the 422 on the rollers. Now I know why you sold your TT, as I did. Welcome to the big stroker club. Guess you're going to inflict some PaiN on your brethern soon! <img src="graemlins/gr_judge.gif" border="0" alt="[judgement]" />
Leo
Leo
Re: Video of the 422 on the rollers. [quote]Originally posted by 7-LITRE:
<strong>If I'm lucky enough to have mine done by then, there will be three Black Pontiacs.</strong><hr></blockquote>
<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
Now THAT would rock! Damn all of you fast guys! You're going to make me spend more money! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
Larry - 504 RWHP is INSANE! How far the 422's have come in such a short time! I remember watching SW's C5 pull a hair over 500 RWHP with an M6 a little over a year ago, and now an A4 is pulling 504 RWHP with ET Streets and a 12-bolt! <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<strong>If I'm lucky enough to have mine done by then, there will be three Black Pontiacs.</strong><hr></blockquote>
<img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
Now THAT would rock! Damn all of you fast guys! You're going to make me spend more money! <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
Larry - 504 RWHP is INSANE! How far the 422's have come in such a short time! I remember watching SW's C5 pull a hair over 500 RWHP with an M6 a little over a year ago, and now an A4 is pulling 504 RWHP with ET Streets and a 12-bolt! <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
__________________
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,497
Likes: 0
From: Katy, TX
Re: Video of the 422 on the rollers. Thanks for all the compliments guys! I'm really pleased with the setup so far. The guys at MTI have been great through the buildup, and went above and beyond in helping me with suggestions, and tips on the car, and just doing an oustanding install!
As far as the details... Its pretty much a clone of Colonel's motor.
422, with stage III LS6 heads. The heads flowed some really impressive numbers, but since I don't have the data in front of my eyes I'm not gonna try and post what I think I remember it was.
The cam is the "Colonel cam" (Ask for it by name!)
The only real difference is the pistons, I'm running a touch more compression than the Colonel.
The tranny is my old PMAC built 4l60e...we'll see how long it holds up. Then it will be on to something beefier.
The rear is a Moser 12-bolt, w/ 4:10's the big axles, and big eaton posi.
Hopefully the long-tubes will be in soon, and we can see if that helps the numbers some more.
Thanks again guys!
As far as the details... Its pretty much a clone of Colonel's motor.
422, with stage III LS6 heads. The heads flowed some really impressive numbers, but since I don't have the data in front of my eyes I'm not gonna try and post what I think I remember it was.
The cam is the "Colonel cam" (Ask for it by name!)
The only real difference is the pistons, I'm running a touch more compression than the Colonel.
The tranny is my old PMAC built 4l60e...we'll see how long it holds up. Then it will be on to something beefier.
The rear is a Moser 12-bolt, w/ 4:10's the big axles, and big eaton posi.
Hopefully the long-tubes will be in soon, and we can see if that helps the numbers some more.
Thanks again guys!
TECH Addict
Joined: Nov 2001
Posts: 2,556
Likes: 0
From: Nawf Carolina
Re: Video of the 422 on the rollers. [quote]Originally posted by PaiN:
<strong>
Hopefully the long-tubes will be in soon, and we can see if that helps the numbers some more.
</strong><hr></blockquote>
504 rwhp thru MACs <img src="images/icons/confused.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0">
<strong>
Hopefully the long-tubes will be in soon, and we can see if that helps the numbers some more.
</strong><hr></blockquote>
504 rwhp thru MACs <img src="images/icons/confused.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0">
Re: Video of the 422 on the rollers. If you're still running Macs, then the power gain will be REALLY nice with longtubes! <img src="images/icons/shocked.gif" border="0">
__________________
Re: Video of the 422 on the rollers. <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0"> <img src="images/icons/shocked.gif" border="0">
LOL!!!!!
That was fu(king awesome!! Even my wife watched it and she could normaly give a rats *** about what i read on here.
LOL!!!!!
That was fu(king awesome!! Even my wife watched it and she could normaly give a rats *** about what i read on here.
TECH Fanatic
Joined: Nov 2001
Posts: 1,347
Likes: 1
From: Freeland, MD
Re: Video of the 422 on the rollers. [quote]Originally posted by 7-LITRE:
<strong>If I'm lucky enough to have mine done by then, there will be three Black Pontiacs.</strong><hr></blockquote>
Hopefully, the Pontiacs won't discriminate against a silver Z <img src="images/icons/grin.gif" border="0">
I think that they do mine in about three weeks. Getting very hard to wait given what some of these other 422s are doing. Mine will be a little less radical since it will be a daily driver (gonna probably use a R1 cam) - though my definition of a daily driver includes a roll cage.
<strong>If I'm lucky enough to have mine done by then, there will be three Black Pontiacs.</strong><hr></blockquote>
Hopefully, the Pontiacs won't discriminate against a silver Z <img src="images/icons/grin.gif" border="0">
I think that they do mine in about three weeks. Getting very hard to wait given what some of these other 422s are doing. Mine will be a little less radical since it will be a daily driver (gonna probably use a R1 cam) - though my definition of a daily driver includes a roll cage.
Re: Video of the 422 on the rollers. Congrats man that is awesome. Oh wife dear I think I know what I want for X-mas.
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
Tom
<img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
Tom
D(irecto)r Pepper
Joined: Nov 2001
Posts: 1,952
Likes: 0
From: Houston Raceway Park...in TEXAS.
Re: Video of the 422 on the rollers. wa-wa-wa-WOW!.
Dang Larry... your gonna pass my E.T. like it's nothing.
Man,it would be great to bore/stroke the pepper while it's down.... NAHhhh, i'll leave the monser motor build ups to you. That this is WICKED.
Your web page should be "Something wicked this way comes" then have your car flash on there.
Seriously.. congrats dude.
Dang Larry... your gonna pass my E.T. like it's nothing.
Man,it would be great to bore/stroke the pepper while it's down.... NAHhhh, i'll leave the monser motor build ups to you. That this is WICKED.
Your web page should be "Something wicked this way comes" then have your car flash on there.
Seriously.. congrats dude.
On The Tree
Joined: Nov 2001
Posts: 156
Likes: 0
From: west coast reppin
Re: Video of the 422 on the rollers. can we get some videos of this car idling? or mobbin.....or anything really......that was ****** bad ***......thanks for makin my night!
jAson
1997 Z28 *rip*
need new beast
jAson
1997 Z28 *rip*
need new beast