Just installed the SLP bellows kit...
12-19-2001, 06:52 PM
#1
TECH Senior Member
Thread Starter
Join Date: Nov 2001
Location: Chi-Town, IL
Posts: 11,603
Likes: 0
Received 0 Likes
on
0 Posts
Just installed the SLP bellows kit... It was kind of a pain in the *** to install...they should of made it a bit longer...if you put it all the way on the MAF, there is about 1/2" to put on the TB...this is how I left it and I just screwed the clamp tight...everythings seems pretty sealed gave it a few revs...I can see how this is somewhat better than the regular... <img src="gr_stretch.gif" border="0">
Took about 10 minutes to install... <img src="gr_stretch.gif" border="0">
Took about 10 minutes to install... <img src="gr_stretch.gif" border="0">
12-19-2001, 07:53 PM
#3
TECH Enthusiast
Re: Just installed the SLP bellows kit... [quote]Originally posted by Mike Hoffpauir:
<strong>You know you can get that coupler for 8 bucks at home depot right?</strong><hr></blockquote>
That coupler, no. Substitute with no flex joint built in, yes.
<strong>You know you can get that coupler for 8 bucks at home depot right?</strong><hr></blockquote>
That coupler, no. Substitute with no flex joint built in, yes.