scan master results
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 489
Likes: 0
From: Out of Texas, into Tucson, AZ
scan master results My car does what it's supposed to do, i'm pleased
0 KR
26.5 Adv and WOT--about (memory)
02 are all good, cycle up to about 88/89
trims are right on, and ~even. cool toy, beats buying a laptop for my A-tap.
now, just have to find a place to put it...i've tried in front of shifter, just below stereo and its now on dash behind defrosters...
0 KR
26.5 Adv and WOT--about (memory)
02 are all good, cycle up to about 88/89
trims are right on, and ~even. cool toy, beats buying a laptop for my A-tap.
now, just have to find a place to put it...i've tried in front of shifter, just below stereo and its now on dash behind defrosters...
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 489
Likes: 0
From: Out of Texas, into Tucson, AZ
Re: scan master results I do get a quck 2.3 - 3.4 KR in 5/6 at LOW rpm. Running it up in 4th is stays at 0 KR until i goto shift, then it flashes 2.x for a nanosecond, maybe 2.
advance at WOT through 4th is fairly steady at @25. I'll have to look at that again tomorrow.
advance at WOT through 4th is fairly steady at @25. I'll have to look at that again tomorrow.
