New cam for the build up
Thread Starter
TECH Veteran
iTrader: (5)
Joined: Nov 2001
Posts: 4,491
Likes: 1
From: Olmsted Falls, OH
New cam for the build up Sooooo
I'm building this motor over the winter. Way be working out a deal w/ a local guy for this cam....
.564 .554 228/224 112lsa
This is a turbo motor BTW.
Heavy on the intake side, good
112 LSA may be a little too tight, but i'm looking to make some serious HP, and the overlap may help me relieve some of the mid range pressure under BIG boost.
What you think?? <img src="gr_stretch.gif" border="0">
I'm building this motor over the winter. Way be working out a deal w/ a local guy for this cam....
.564 .554 228/224 112lsa
This is a turbo motor BTW.
Heavy on the intake side, good
112 LSA may be a little too tight, but i'm looking to make some serious HP, and the overlap may help me relieve some of the mid range pressure under BIG boost.
What you think?? <img src="gr_stretch.gif" border="0">
TECH Enthusiast
Joined: Nov 2001
Posts: 712
Likes: 1
From: Dallas,Texas
Re: New cam for the build up See if there is anything close that you
can compare to here ( setups that other have )
http://ls1info.com/camstats/showdata.php
or you can enter your setup+thoughts here
http://ls1info.com/camstats
can compare to here ( setups that other have )
http://ls1info.com/camstats/showdata.php
or you can enter your setup+thoughts here
http://ls1info.com/camstats
