LS1 EWP: Please post the TOTAL system weight!
Thread Starter
9 Second Club
iTrader: (11)
Joined: Nov 2001
Posts: 941
Likes: 0
From: Back home in Texas!!! (DFW)
LS1 EWP: Please post the TOTAL system weight! Can Joe Prince or one of the other guys close to the LS1 Electric Water Pump assembly please post the total system weight vs. what is removed/replaced?
Verified weights, please, so no one argues later. Regardless of the power increase, I want to know what you'd be adding/subtracting weight-wise. Thanks.
Verified weights, please, so no one argues later. Regardless of the power increase, I want to know what you'd be adding/subtracting weight-wise. Thanks.
TECH Apprentice
Joined: Nov 2001
Posts: 369
Likes: 0
From: NJ
Re: LS1 EWP: Please post the TOTAL system weight! we'll take it off joe's car and weigh it, but remember that we are no longer using our original design of the tubular aluminum which was flyweight. Because of quality issues we changed to billet material but I'll get the numbers for you
Jay
Jay
Thread Starter
9 Second Club
iTrader: (11)
Joined: Nov 2001
Posts: 941
Likes: 0
From: Back home in Texas!!! (DFW)
Re: LS1 EWP: Please post the TOTAL system weight! [quote]Originally posted by Jay 95WS6:
<strong>we'll take it off joe's car and weigh it, but remember that we are no longer using our original design of the tubular aluminum which was flyweight. Because of quality issues we changed to billet material but I'll get the numbers for you
Jay</strong><hr></blockquote>
Thanks. Just post the production version wt. when you get it.
<strong>we'll take it off joe's car and weigh it, but remember that we are no longer using our original design of the tubular aluminum which was flyweight. Because of quality issues we changed to billet material but I'll get the numbers for you
Jay</strong><hr></blockquote>
Thanks. Just post the production version wt. when you get it.
