Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Thoughts on this cam...

Thread Tools
 
Search this Thread
 
Old 12-27-2001, 11:19 AM
  #1  
Teching In
Thread Starter
 
BIG NUGGETS's Avatar
 
Join Date: Nov 2001
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default Thoughts on this cam...

Lunati 226/234 561/561 112 in a stock displacement H/C car? <img src="gr_eek2.gif" border="0">
Old 12-28-2001, 12:07 AM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 32 Likes on 28 Posts

Default Re: Thoughts on this cam...

Not a good choice for an automatic car, still on the big side for an M6. Be prepared to turn it really tight (7000+ rpms) to get the most out of it. This would be a better street racing cam than a drag racing cam. The lack of low end torque from this cam would be good at limiting wheelspin for the street, but would loose out at the track to a harder launching 222/222 cam. At the track, it's all about the first 60'. In a street race, it's all about the top-end pulling power.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 12-28-2001, 12:31 AM
  #3  
Speed freak
 
Supertrapped's Avatar
 
Join Date: Dec 2001
Location: Tulsa, OK
Posts: 1,477
Likes: 0
Received 0 Likes on 0 Posts
Default Re: Thoughts on this cam...

Ditto what Patrick said




All times are GMT -5. The time now is 06:08 AM.