Best heads for the money w/ TR224?
#41
FormerVendor
iTrader: (7)
Join Date: Apr 2003
Location: Lubbock
Posts: 1,106
Likes: 0
Received 0 Likes
on
0 Posts
The stage 2.5 5.3L PRC heads will be the best bet for the 224 cam in terms of cost and gains involved.
1199 plus shipping, Assembled with the PRC dual springkit....even cheaper if assembled with 918's or 1000 with no springs.
220cc runner with the 5.3L head versus the larger runner LS6's.....314cfm through a 220cc runner at .600 lift and 11.25:1 compression will make for a wicked street/strip car
1199 plus shipping, Assembled with the PRC dual springkit....even cheaper if assembled with 918's or 1000 with no springs.
220cc runner with the 5.3L head versus the larger runner LS6's.....314cfm through a 220cc runner at .600 lift and 11.25:1 compression will make for a wicked street/strip car
#42
TECH Fanatic
iTrader: (17)
Join Date: Sep 2006
Location: dayton ohio
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zach@Texas-Speed
The stage 2.5 5.3L PRC heads will be the best bet for the 224 cam in terms of cost and gains involved.
1199 plus shipping, Assembled with the PRC dual springkit....even cheaper if assembled with 918's or 1000 with no springs.
220cc runner with the 5.3L head versus the larger runner LS6's.....314cfm through a 220cc runner at .600 lift and 11.25:1 compression will make for a wicked street/strip car
1199 plus shipping, Assembled with the PRC dual springkit....even cheaper if assembled with 918's or 1000 with no springs.
220cc runner with the 5.3L head versus the larger runner LS6's.....314cfm through a 220cc runner at .600 lift and 11.25:1 compression will make for a wicked street/strip car
#43
TECH Enthusiast
iTrader: (7)
Join Date: Sep 2003
Location: Ft. Worth-ish
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
The TSP 5.3 stage 2.5 are what I'm looking at. I just wish I didn't have to pay sales tax on them.......
Got any incentives going???? Maybe an install and tune deal if I drive out there from Ft. Worth???
Zach,
Between the 2.04 and 2.02 what valve size would you suggest with a GTP420 cam?
226/226 .591/.591 112+2.
I was thinking 2.02 to keep the velocity up plus less shrouding.
Are these heads milled any? I'd like to be able to reuse my 7.4" push rods.
Got any incentives going???? Maybe an install and tune deal if I drive out there from Ft. Worth???
Zach,
Between the 2.04 and 2.02 what valve size would you suggest with a GTP420 cam?
226/226 .591/.591 112+2.
I was thinking 2.02 to keep the velocity up plus less shrouding.
Are these heads milled any? I'd like to be able to reuse my 7.4" push rods.
Last edited by Greed4Speed; 12-15-2006 at 05:53 PM.