LS1TECH - Camaro and Firebird Forum Discussion

Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

SLP header install

Thread Tools
 
Search this Thread
 
Old Jan 11, 2002 | 11:57 PM
Share
  #1  
blackssmagic's Avatar
blackssmagic
Thread Starter
Staging Lane
 
Joined: Jan 2002
Posts: 52
Likes: 0
From: Las Vegas NV
Default SLP header install
Well i have the starter off and the motor mounts, the car is a 99 so what is the trick, in the bottom if so how. I am going to give it a try in the morning again so thanks.
Reply
0
Old Jan 12, 2002 | 01:52 AM
Share
  #2  
Mike K.'s Avatar
Mike K.
TECH Junkie
 
Joined: Dec 2001
Posts: 3,242
Likes: 0
From: Lakeland, FL
Default Re: SLP header install
you have to have it high enough off the ground and then unbolt the tranny cross member, then push the tranny to the side a little and they should slide right in.
Reply
0
Old Jan 12, 2002 | 08:01 AM
Share
  #3  
TA_2001's Avatar
TA_2001
TECH Enthusiast
 
Joined: Nov 2001
Posts: 712
Likes: 1
From: Dallas,Texas
Default Re: SLP header install
This should help you out..
http://ls1info.com/article.php?sid=149

and a few notes

http://ls1info.com/modules.php?op=mo...=34&forum=3&12

[ January 12, 2002: Message edited by: TA_2001 ]</p>
Reply
0
Old Jan 12, 2002 | 04:54 PM
Share
  #4  
JaSSon00's Avatar
JaSSon00
Launching!
 
Joined: Nov 2001
Posts: 214
Likes: 0
From: Houston
Default Re: SLP header install
no need to take the motor mounts out, just get it really high and take the crossmember out and they WILL slide right in.

Jason
Reply
0
Back to Subforum
Generation III Internal Engine
View Next Unread
coil pack relocation




Advanced Search

All times are GMT -5. The time now is 08:22 AM.