New Dyno Results with NITROUS.....
#1
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Newtown, PA
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
New Dyno Results with NITROUS.....
Well my previous best was 437.8 RWHP with off road pipes. Just engine, no Nitrous...
I had Carsound 3" cats welded into my MAC Y pipe and lost about 10 RWHP from that. I am going to get the Flowmaster collector welded into my MAC Y pipe and that should give me 1 or 2 RWHP and I still have to get my throttlebody ported. That should give me another 1 or 2 RWHP.
Julio installed a 100 Flywheel HP shot nozzel into my car today to give me about 80 RWHP more then my engine setup has.
Well after two runs, my best nitrous run was....
519.1 RWHP SAE
641.8 RW Torque SAE !!!!!! Damn....
So Julio and Dave were about dead on by giving me close to 80 RWHP with a small 100 shot jet. But the torque is outrageous. I couldn't believe how high it was. All I can say is that I am never spraying on the street!! I would do doughnuts...
Julio will post the dyno numbers when he gets a chance...
Dan
[ February 02, 2002: Message edited by: 2002SS ]</p>
I had Carsound 3" cats welded into my MAC Y pipe and lost about 10 RWHP from that. I am going to get the Flowmaster collector welded into my MAC Y pipe and that should give me 1 or 2 RWHP and I still have to get my throttlebody ported. That should give me another 1 or 2 RWHP.
Julio installed a 100 Flywheel HP shot nozzel into my car today to give me about 80 RWHP more then my engine setup has.
Well after two runs, my best nitrous run was....
519.1 RWHP SAE
641.8 RW Torque SAE !!!!!! Damn....
So Julio and Dave were about dead on by giving me close to 80 RWHP with a small 100 shot jet. But the torque is outrageous. I couldn't believe how high it was. All I can say is that I am never spraying on the street!! I would do doughnuts...
Julio will post the dyno numbers when he gets a chance...
Dan
[ February 02, 2002: Message edited by: 2002SS ]</p>
#2
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Long Island
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno Results with NITROUS.....
Now all you need to do is get that car to E-Town and race me <img src="gr_grin.gif" border="0"> you have an awesome set-up there and should have no problem smoking me on motor <img src="gr_stretch.gif" border="0">
#3
Re: New Dyno Results with NITROUS.....
<img src="gr_grin.gif" border="0"> <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
#5
LS1 Tech Administrator
iTrader: (14)
Re: New Dyno Results with NITROUS.....
Yeah, I used to say I'd never spray on the street with over 500 rwhp too. <img src="images/icons/rolleyes.gif" border="0">
See how long that feeling lasts. <img src="gr_images/icons/wink.gif" border="0"> Nice numbers. <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
See how long that feeling lasts. <img src="gr_images/icons/wink.gif" border="0"> Nice numbers. <img src="graemlins/gr_cheers.gif" border="0" alt="[cheers]" />
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#6
TECH Fanatic
Re: New Dyno Results with NITROUS.....
Very nice numbers. Gotta love the spray <img src="gr_grin.gif" border="0">
Hey, I noticed you have 4.10s. Any hope you ever had of hooking up that power on the street (I hate to say) is gone with the 4.10s. They will let you run a really tall tire at the track, though, which should be fun for all that power. All the same, have you considered maybe backing off to 3.73s?
I'm about 20 RWHP behind you all motor, but ain't nowhere near that torque. And I have big problems hooking that on the street. Gonna be fun for you all the same.
Hey, I noticed you have 4.10s. Any hope you ever had of hooking up that power on the street (I hate to say) is gone with the 4.10s. They will let you run a really tall tire at the track, though, which should be fun for all that power. All the same, have you considered maybe backing off to 3.73s?
I'm about 20 RWHP behind you all motor, but ain't nowhere near that torque. And I have big problems hooking that on the street. Gonna be fun for you all the same.
#7
TECH Addict
iTrader: (6)
Join Date: Nov 2001
Location: Tampa, Florida
Posts: 2,099
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno Results with NITROUS.....
@#$%^&*(*&^%$#@!#$%^&*&^%$#@$%^&*!!!!!!
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> <img src="graemlins/gr_devil.gif" border="0" alt="[devil]" />
<img src="graemlins/gr_hail.gif" border="0" alt="[hail]" /> <img src="graemlins/gr_devil.gif" border="0" alt="[devil]" />