What do you guys think?
Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
What do you guys think? http://racingjunk.com/post/789750/LS...-mani-mor.html
This guy is selling all this stuff at a killer deal, and I am in the process of buying it. It has a small cam though..
it is a 220/224 with .581 exhaust and intake. I think I might go with a bigger cam, but I was wanting to know your guys opionins first... And If I do go with something bigger and shave the heads will I have a PTV issue??
The heads are a 66cc.
I was thinking about shaving it down to a 62cc. what do you think?
Well let me know what you guys think. Thanks
Lane
This guy is selling all this stuff at a killer deal, and I am in the process of buying it. It has a small cam though..
it is a 220/224 with .581 exhaust and intake. I think I might go with a bigger cam, but I was wanting to know your guys opionins first... And If I do go with something bigger and shave the heads will I have a PTV issue??
The heads are a 66cc.
I was thinking about shaving it down to a 62cc. what do you think?
Well let me know what you guys think. Thanks
Lane
Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
Lmao, probibly, But I think I have that stuff in the bag!!! HOPEFULLY.
I am not sure what I really wanna do. I think I might just sell my stock LS6 heads and my LS6 intake. and that baby cam that comes with that setup. And get the rest of the coponents I will need for the build. Or I was actually thinking about selling the AFR heads also, and going with some stage 2 head an cam package from TSP, and save my self a couple of hundred dollers. Ha. But I am not sure what to do. All I know is I want more power and lots of it. And a car that does not sound bad. That runs easy 11 sec.
Lane
I am not sure what I really wanna do. I think I might just sell my stock LS6 heads and my LS6 intake. and that baby cam that comes with that setup. And get the rest of the coponents I will need for the build. Or I was actually thinking about selling the AFR heads also, and going with some stage 2 head an cam package from TSP, and save my self a couple of hundred dollers. Ha. But I am not sure what to do. All I know is I want more power and lots of it. And a car that does not sound bad. That runs easy 11 sec.
Lane
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
11 Second Club
iTrader: (19)
Joined: May 2006
Posts: 965
Likes: 0
From: Whidbey Island, Wa.
Will I be fine with PTV clearance on that cam?
If I did go that route and had the fast 90 and TB. What kinda numbers would I be looking at with all the supporting mods???
Lane
If I did go that route and had the fast 90 and TB. What kinda numbers would I be looking at with all the supporting mods???
Lane
Let us know if the deal is actually legit. It sounds too good to be true but wierder things have happened I guess. Good luck with the purchase and let us know if ya want to sell the afr's.