resleving?
#2
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Turlock, Ca
Posts: 1,735
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Pretty much as it sounds the pressing in
of a new sleeve( the actual piston bore)
Aluminum blocks require sleeves for
strength and wear) You probably should
mic. the 6.0 for wear, if necessary
you can bore oversize with new pistons <img src="gr_images/icons/wink.gif" border="0">
of a new sleeve( the actual piston bore)
Aluminum blocks require sleeves for
strength and wear) You probably should
mic. the 6.0 for wear, if necessary
you can bore oversize with new pistons <img src="gr_images/icons/wink.gif" border="0">