need quick help on pulley
need quick help on pulley how do i keep the pulley from moving on install...it an ASP on an A4.
i stuck a ratchet in the stock one to get it off, but i cant do that with the ASP..
TIA
jerry
i stuck a ratchet in the stock one to get it off, but i cant do that with the ASP..
TIA
jerry
Re: need quick help on pulley Pull the inspection plug on trans.And use
large screwdriver to hold flywheel.Not
the best but it works.Also can pull starter
and stick a pc. of 2x4 in flywheel.I know
you don't have flywheel holding tool
or you wouldn't ask how <img src="gr_stretch.gif" border="0">
large screwdriver to hold flywheel.Not
the best but it works.Also can pull starter
and stick a pc. of 2x4 in flywheel.I know
you don't have flywheel holding tool
or you wouldn't ask how <img src="gr_stretch.gif" border="0">
Re: need quick help on pulley L - V HAWK is rite on:::the inspection plug is about the size of a silver dollar with two little tabs on it also there is a plastic flap above the starter where you can insert a screw driver withuot haveing to pull the starter
Re: need quick help on pulley thx alot LV hawk <img src="gr_grin.gif" border="0">
got it all done...... <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
got it all done...... <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" /> <img src="graemlins/fluffy.gif" border="0" alt="[Fluffy]" />
