OK cam and stockhead question
Thread Starter
*Bad Trader*
Joined: Nov 2001
Posts: 1,459
Likes: 0
From: here and there
OK cam and stockhead question im giveng my brother advise about a cam and i dnt want to steer him the wrong way (cuz i had a lot of help with mine) he has a 2001 like me and wants just a cam, he allready has grott long tubes and a great catback and will run n20 eventually soi told him that my cam would be a good choice, what do yall think honest opinons from experienced people plese, 218/224 .563 .569 114lsa +4 comp grind? will it produce well on a stocker wit long tubes and n20, is anyone running a similar setup? thnx
TECH Regular
Joined: Nov 2001
Posts: 455
Likes: 0
From: Houston, TX USA
Re: OK cam and stockhead question I would stick to around a 2 and at the most a 4 degree duration split on the camshaft with nitrous. Most of our cams are also ground +2 ICL.
Keep the LSA out to 114 and you should be good to go.
Have fun. <img src="gr_stretch.gif" border="0">
Keep the LSA out to 114 and you should be good to go.
Have fun. <img src="gr_stretch.gif" border="0">
