T-rex with 3000 stall ?!
Thats kinda low for a TRex. I wouldn't wanna do one on anything lower than 3600 and thats pushing it. The problem is it will want to buck really bad at lower speeds and it won't have any power off idle it would just be much harder to drive.
I've heard don't go less than a 4000 stall with the trex...it's a pretty large cam. If you're looking for a cam that works well with a 3000ish convertor go with something with less than low 230's degrees of intake duration.
Trending Topics
Thread Starter
12 Second Club
Joined: Feb 2005
Posts: 339
Likes: 0
From: Gas Station
Well I do have a Yank 4400 2.5STR.
As You guys notice, all the replies we see is about, People telling people, I heard, the guy said etc.
I hear all of this too, I am asking for someone who did it. I don't care about what people say.
Thanks fellas
As You guys notice, all the replies we see is about, People telling people, I heard, the guy said etc.
I hear all of this too, I am asking for someone who did it. I don't care about what people say.
Thanks fellas
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by CRZYPWR
Well I do have a Yank 4400 2.5STR.
As You guys notice, all the replies we see is about, People telling people, I heard, the guy said etc.
I hear all of this too, I am asking for someone who did it. I don't care about what people say.
Thanks fellas
As You guys notice, all the replies we see is about, People telling people, I heard, the guy said etc.
I hear all of this too, I am asking for someone who did it. I don't care about what people say.
Thanks fellas
I gave you my experience. Not my brothers sister in-laws first cousins nephwe twice removed.
trex with a low stall WILL suck man, trust me. With that small of a stall and that high revving cam it wouldnt be a good combo. people are telling you what is going to happen but if your to much of a dumbass to listen then go ahead and do it and see how much it sucks and then you will think to yourself, man i shouldve listened.
Originally Posted by BrianC98Z28
trex with a low stall WILL suck man, trust me. With that small of a stall and that high revving cam it wouldnt be a good combo. people are telling you what is going to happen but if your to much of a dumbass to listen then go ahead and do it and see how much it sucks and then you will think to yourself, man i shouldve listened.
True dat.stick a 4000 or above if I was you.
