02blackbeauty19

iTrader: (22)

I have the G5X3 cam in my vette and want to do some heads soon. What does everyone think about the trickflows with this cam and how much do they run (price wise). Do any other mods have to be made to run these heads ? Thanks guys

Chris

thehammer69

iTrader: (2)

You should be able to throw those heads right on there. Just do a DCR caculation to figure what the optimum Combustion Chamber size should be and Mill accordingly. I'm guessing you can take them down to 59cc's safely due to the increase P/V clearance. Also, Trickflow does not recommend using the stock rockers on these heads, they will fail after some time...I forget the exact reason why. I think the recommended rockers are the Harland Sharps.

Hammer

orangeapeel

iTrader: (18)

If you are gonna drop the coin on the rockers, get the Jessels.

DONAIMIAN

iTrader: (18)

If I can swing these on my motor ill be using the comp shaftmounts. (red annodized ones) If not, Ill still use the same rockers.

orangeapeel

iTrader: (18)

I wish I would have bought some of those comp ones you are talking about D. I could have got a set for under 250$ when I worked for that craptastic shop.

Brian Tooley Racing

iTrader: (13)

It should work fine, it seems the big power cams used with the TFS heads are in the upper 230's @ .050" on intake duration, but like was said, you will need roller rockers.

02blackbeauty19

iTrader: (22)

Cool thanks for all the info

DONAIMIAN

iTrader: (18)

About a month and a half ago it was a set forsale here for 500, if only it was a little later I coulda jumped on it.