total engine airflow
Thread Starter
TECH Fanatic
iTrader: (2)
Joined: Jan 2002
Posts: 1,392
Likes: 1
From: roanoke virginia
total engine airflow Does anyone have any experince with there stage 2 heads? The reason i ask is because Over the winter a freind of mine got a set of victor JR's from them for his mustang and picked up Almost 40 HP over his other victor jr's that came from one of the best head porters in the country.Keep in mind that his car is making almost 900 RWHP. So that is alot of hp to gain at that level.There ls1 stage 2 heads are $1800.
Staging Lane
Joined: Jan 2002
Posts: 94
Likes: 0
From: Wall Township, NJ
Re: total engine airflow I have heard nothing but good things about Brian Tooley and Total Engine Airflow. I ordered a set of 5.3 heads today, after I get everything installed I will post the results.
Re: total engine airflow Ive had their Stage 2 heads,Hammer Cam,and thier LS6 intake for a while now. I am very pleased with the results. Theve been on for a year now. FWIW I have an A4 i dynoed at 379-389 RWHP all the time and 419-430 RWTQ. The most recent was 381 ad 430, going through a closed up exhaust and PY4000E convert6r and 3.23 gears. But dyno #'s are nothing ive run consistant 7.19-7.23 at 96mph on a 1.56 60'. This weekend before I scattered the motor on the giggle i went 1.78 60', 7.28 at 96 and 11.45 at 119.6 . There was much room for improvement in 60' be the track prep sucked and the ET Street wouldnt hook for ****. Then I juiced a little on the next pass and blew the rods out the bottom end. Me and Brian are in the process of building a 427 solid roller. It will be thier 6.0 heads, a modified LS6 intake, and the rest of the bolt on that im missing. Should be a stout runner. Over all customer service is great, He is a great guy to deal with, and has a execellent shop the dose quality work. Id recommend him to anyone. Thanks Justin Hagerman. <img border="0" alt="[Chevrolet]" title="" src="graemlins/camaro.gif" />
Re: total engine airflow I have a set of Stage 1 heads and cam 222/222 566/566 going in next week from TEA. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
My flow numbers were great for a head reataining the stock valves. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> We will see how great after track testing and a dyno session in two weeks if everything goes right. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I believe Matt made 420 rwhp (sae corrected) with a few mods and LS1 intake with their stage two heads and same cam I listed above. Andy also had over 400 rwhp and my friend Darryl did as well with their heads.
ERic
www.installuniversity.com
My flow numbers were great for a head reataining the stock valves. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" /> We will see how great after track testing and a dyno session in two weeks if everything goes right. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I believe Matt made 420 rwhp (sae corrected) with a few mods and LS1 intake with their stage two heads and same cam I listed above. Andy also had over 400 rwhp and my friend Darryl did as well with their heads.
ERic
www.installuniversity.com
