Lifter Question
05-01-2002, 09:36 PM
#2
9 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Chicago
Posts: 782
Likes: 0
Received 0 Likes
on
0 Posts
Re: Lifter Question Well I've never measured the non R lifters but if they're like the R's then the plunger depth will be different. Which means the pushrods will be too short since the plunger depth is lower than the stockers.
Usually pushrods that are too long will cause rough idle and other issues. Too short would man that the valves are opening late. Probably could cause some issues.
Usually pushrods that are too long will cause rough idle and other issues. Too short would man that the valves are opening late. Probably could cause some issues.