P0302 Solved, Broken Valvespring
Thread Starter
Staging Lane
Joined: Jan 2002
Posts: 69
Likes: 0
From: Cuyahoga Falls OH
P0302 Solved, Broken Valvespring As many suspected.
Thanks for the advice!
All is well..........NEW question, has anyone installed a Oil Temp gauge? Is there "easy" place to install the sensor? I'm guessing the pan will have to come down?
I've notice the water temp never gets over 183* at cruise on a warm day since I've been monitoring it, If I'm correct, the water will reach 180 before the oil. Well the day the code set, it was 39* the water temp was around 178 and maybe the springs never heated up? Also if I discover that the oil temp is not getting up there then obviously I will have to put the stock stat back in.
As always thanks! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Thanks for the advice!
All is well..........NEW question, has anyone installed a Oil Temp gauge? Is there "easy" place to install the sensor? I'm guessing the pan will have to come down?
I've notice the water temp never gets over 183* at cruise on a warm day since I've been monitoring it, If I'm correct, the water will reach 180 before the oil. Well the day the code set, it was 39* the water temp was around 178 and maybe the springs never heated up? Also if I discover that the oil temp is not getting up there then obviously I will have to put the stock stat back in.
As always thanks! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
