7350 pushrods or 7400
#1
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Houston
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
hey guys,
what pushrod should you use if have have a set of ls1 5.7 heads and they have been milled. i have heard that 7400 is ok and i have been told to use 7350s. i also have heard that the 7350 will make more power!!!!
thanks
what pushrod should you use if have have a set of ls1 5.7 heads and they have been milled. i have heard that 7400 is ok and i have been told to use 7350s. i also have heard that the 7350 will make more power!!!!
thanks
#3
TECH Enthusiast
Thread Starter
Join Date: Nov 2001
Location: Houston
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by AzzHauler:
<strong>Depends on how much was milled and how big the cam base circle is compared to stock.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">30 thousanths and the cam is the b1 cam form mti. im not sure what the base circle is
<strong>Depends on how much was milled and how big the cam base circle is compared to stock.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">30 thousanths and the cam is the b1 cam form mti. im not sure what the base circle is