im trying out an idea...
05-12-2002, 11:14 PM
#1
*Bad Trader*
Thread Starter
Join Date: Nov 2001
Location: here and there
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
im trying out an idea... some say the hotcam isnt verry good and some say it is, well im gonna try it on a freinds car with 1.8 rockers and see what happens what would the lift be then? oh and we will get befor and after with an with out n20...results to come soon...........
05-12-2002, 11:20 PM
#2
LSxGuy widda 9sec Mustang
iTrader: (12)
Join Date: Nov 2001
Location: Texas and Qatar
Posts: 3,043
Likes: 0
Received 0 Likes
on
0 Posts
Re: im trying out an idea... 1.8 rockers will give it .556" lift. You'll need more valvespring than what the hotcam kit comes with <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
05-13-2002, 10:26 AM
#4
FormerVendor
iTrader: (2)
Join Date: Dec 2001
Location: Baton Rouge, LA, USA
Posts: 1,954
Likes: 0
Received 3 Likes
on
3 Posts
Re: im trying out an idea... This will be an interesting experiment.
One thing to remember though, the big draw to the Hotcam is price... Once you start adding aftermarket valvesprings and rockers maybe you could have just used an aftermaket cam after all.
Please don't take this as a flame. I will definitely be looking for your results. I know there are those who would like to know how good you can make this cam perform...
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Shane
One thing to remember though, the big draw to the Hotcam is price... Once you start adding aftermarket valvesprings and rockers maybe you could have just used an aftermaket cam after all.
Please don't take this as a flame. I will definitely be looking for your results. I know there are those who would like to know how good you can make this cam perform...
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Shane
05-13-2002, 03:35 PM
#5
*Bad Trader*
Thread Starter
Join Date: Nov 2001
Location: here and there
Posts: 1,459
Likes: 0
Received 0 Likes
on
0 Posts
Re: im trying out an idea... well i know im looking for low end with some topend on the bottle and i think this just might do it but if not then ill start all over. maybe a 218-220 on a 111Lsa or 112lsa and see what happens
05-13-2002, 05:51 PM
#6
TECH Apprentice
Join Date: Nov 2001
Location: Cape Coral,FL
Posts: 357
Likes: 0
Received 0 Likes
on
0 Posts
Re: im trying out an idea... sounds like a GOOD combo, but i would do 220/218 or 222/220 on a 111LSA with like a .550 lift, that would be a sweet wicked cam...