I say----->663HP/645TQ
Thats figuring about 1.5 HP per CI

JS

<small>[ May 14, 2002, 09:15 AM: Message edited by: JS ]</small>

 

so when are you going to know?

also my predictions are 650HP and 550 TQ. it is hard to pull that much TQ with only 418 ci

 

I'm with Trevor! <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

 

it should be over 650hp, not sure by how much...but it should be

i'd bet in the 675 range on motor maybe even close to the 685 range.

with 3400lbs, it really takes a lot of hp to pull that MPH

 

So far here are "MY" list of guys who is even close or have a clue.

Patrick G 620/550
Jimmy kash
Trevor D 680/630
Gator 99TA 650/550
XLr8nss 690
Crazy quick 675
LEO (695-700)hp

1st off guys it's noway this motor is making more TQ than HP...... Bad Z you are where closer too RWHP than BHP

let me help you guys out. 375 baby motor made. 490RWHP with a 10bolt and 6 speed.

This motor runs 10MPH and .7 faster.

thast about 70-100 HP boys.

so this motor is going to make.

650-690 BHP 580-600BTQ
575-590 RWHP 490-510RWTQ

and after it's tune!!!!

680-700 BHP 590-610BTQ

590-610 RWHP 500-520RWTQ

remember I told you so.

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by One Monkey:
<strong>let me help you guys out. 375 baby motor made. 490RWHP with a 10bolt and 6 speed.

This motor runs 10MPH and .7 faster.

thast about 70-100 HP boys.

so this motor is going to make.

650-690 BHP 580-600BTQ
575-590 RWHP 490-510RWTQ

and after it's tune!!!!

680-700 BHP 590-610BTQ

590-610 RWHP 500-520RWTQ

remember I told you so.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">The 375 inch motor was dynoed with the Jerico and 9 inch setup.

At what RPM do you guys think it will make peak HP. I think that's where most people are gonna be surprised.

 

I predict a power peak at 6800 rpms, but it will carry it cleanly to 7800, then start falling ever so slightly to the 8000 rpm rev limiter.

 

i think it will go 625hp and 5.. um 42tq?

ASSUMING LS6 'style' intake.

<small>[ May 15, 2002, 01:54 PM: Message edited by: MIGHTYMOUSE ]</small>

 

683hp and 617tq

 

ONE DOLLAR!!!!!!!!!!!!!!!!

 

What intake do they run on this bad boy? This will be the killer.

They have the heads to do 700HP Engine.

 

My scoop says over 700..

Try 703/630ish

We'll have to see.............

 

Is it going to have the hidden 50 shot on it like it was in the car?

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Terry Burger:
<strong>Is it going to have the hidden 50 shot on it like it was in the car?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">hmm........is that how you broke 400 rwhp? lol

 

Are the results in yet?

 

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Terry Burger:
<strong>Is it going to have the hidden 50 shot on it like it was in the car?</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">A hidden 50 shot? Why dont you stop by the pits some time and check it out?

<small>[ May 15, 2002, 03:18 PM: Message edited by: Bad90lx ]</small>

 

ok I guess I'll be the dumba$$ to ask...who or whom is SAM?? <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />

 

706/632 before tuning... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

 

School of Automotive Machinists in Houston.

 

I'll say 650 with the LS6 and maybe 675 with the short intake.