Rev limit for TR 224 on a 112 LSA?

Reply Subscribe

Thread Tools

Search this Thread

06-07-2002, 04:47 PM

Scalpel

TECH Senior Member

Thread Starter

iTrader: (4)

Join Date: Nov 2001

Location: Lexington, Ky

Posts: 7,000

Likes: 0

Received 1 Like on 1 Post

Rev limit for TR 224 on a 112 LSA?

How's a 6800 rev-limiter? Thanks.

Reply Like

06-07-2002, 06:47 PM

Sears

!Dial-up Director

Join Date: Nov 2001

Location: Louisiana

Posts: 3,100

Likes: 0

Received 1 Like on 1 Post

Re: Rev limit for TR 224 on a 112 LSA?

Thats fine, I have mine at 6600rpms.

Justin

Reply Like

06-07-2002, 07:30 PM

VINCE

Shorty Director

iTrader: (1)

Join Date: Nov 2001

Location: Valrico, Florida

Posts: 8,260

Likes: 1

Received 4 Likes on 3 Posts

Re: Rev limit for TR 224 on a 112 LSA?

I agree.. My old rev limit with my T1 was set at 6900rpm.. From 6600 to 6900rpm should be fine. Your peak should be around 6300rpm.. Get a shift light and shift around 6500rpm..

Reply Like

06-07-2002, 09:07 PM

AlonzoVersion 1.0

TECH Addict

Join Date: Dec 2001

Location: Fort Worth,TX

Posts: 2,340

Likes: 0

Received 0 Likes on 0 Posts

Re: Rev limit for TR 224 on a 112 LSA?

Thats sounds good to me.Thats what I am going to raise mine to as well.

Reply Like

06-08-2002, 04:53 PM

J'sRamAir

TECH Apprentice

Join Date: Nov 2001

Location: Lexington, SC

Posts: 350

Likes: 0

Received 0 Likes on 0 Posts

Re: Rev limit for TR 224 on a 112 LSA?

Here's a question I just thought about. My tach is 200 rpm fast at idle (reads 1000 but Atap says 800) but at the rev limiter it's dead on. I want to see if my tach will read 6800 once I set it to 6800 (T1, hardened rods, Ti retainers, 918 springs) so will it hurt anything if I run the engine up until it hits the new limiter at 6800? I know hitting the limiter is 'ok' with stock valvetrain but I don't hear too much talk of hitting limiters with an upgraded valvetrain.