need help on heads and cam install
Thread Starter
TECH Addict
Joined: Nov 2001
Posts: 2,956
Likes: 0
From: Monroe, SD
need help on heads and cam install ok since i cant get anyone to help me and i aint paying overinflated shop prices for this i will do it my self. i just need torque specs for bolts if some one has a manual. i would apprciate it
and it is for both the heads and cam i already got gaskets and new head bolts.
oh if any one has a link to a site that tells how to do it that would be nice. TIA
and it is for both the heads and cam i already got gaskets and new head bolts.
oh if any one has a link to a site that tells how to do it that would be nice. TIA
Re: need help on heads and cam install hit ls1.com and look in HELP. They have a huge torque spec page. I also found autozone has all our specs on line!! As far as install docs, try ls1nfo.com and installuniversity.com.
Many people have done this; try a search on the UBB.
Many people have done this; try a search on the UBB.
Staging Lane
Joined: Jul 2002
Posts: 69
Likes: 0
From: El Paso
Re: need help on heads and cam install Go to www.installuniversity.com and look around there is a link to a head and cam install in there.
TECH Fanatic
Joined: Nov 2001
Posts: 1,705
Likes: 0
From: Iowa :-/~
Re: need help on heads and cam install Yes I done Heads, Cam, Clutch, Slave, Master, Strange 12 bolt Rear end and Wolf Race Craft sway bar all at the same time by muself with the help of installuniversity!
