I was wondering if someone could help.I have an 02ss lid,ported&descreened maf,macs,offroad y,slp exhaust,3200vig,hpp3,& 373s.I am gonna be running the stock heads for a couple of months till i get a little more saved so i can get a tea stage2 port job.I would like to have a good cam that pulls from say 2500 to 6000 or so i would really appreciate the help almost forgot im gonna spray it also with a nx wet kit.

 

How about mine for 350.00 shipped.See sig at the bottom.

 

220/220 112 .56X 108 I/C will have good torque, be done by 6300 and take 100 - 150 shot no problem. going with more duration will primarily increase power above 6000 rpm. You could add additional lift by using the comp XE-R lobes.

<small>[ August 01, 2002, 08:41 AM: Message edited by: Ragtop 99 ]</small>

 

I agree with Ragtop a nice 220-222 duration cam on XE-R lobes would work well.
Find out what port volume your heads are going to have OR let them know your cam choice in advance.
Chris