Need Comp Spring Tech Data Please...
Thread Starter
Joined: Nov 2001
Posts: 5,649
Likes: 9
From: Warr Acres, OK
Need Comp Spring Tech Data Please... I need the remommended installed height and coil bind height for both the 918 and 941 springs. Also, the spring pressures at the installed height and at max lift Thanks.
Re: Need Comp Spring Tech Data Please... Installed Load: 105 lbs @ 1.800" 130 lbs @ 1.800"
Open Load: 293 lbs @ 1.200" 318 lbs @ 1.200"
Spring Rate: 313 lbs/in 313 lbs/in
Coil Bind Height: 1.085" 1.085"
Outside Diameter: 1.290"/1.060” 1.290"/1.060”
Inside Diameter: .885"/.656” .885"/.656”
Retainer: TI 772/Steel 774 TI 772/Steel 774
Part # 26915-16 26918-16
Description GM LS1 Spring High Load Spring
Open Load: 293 lbs @ 1.200" 318 lbs @ 1.200"
Spring Rate: 313 lbs/in 313 lbs/in
Coil Bind Height: 1.085" 1.085"
Outside Diameter: 1.290"/1.060” 1.290"/1.060”
Inside Diameter: .885"/.656” .885"/.656”
Retainer: TI 772/Steel 774 TI 772/Steel 774
Part # 26915-16 26918-16
Description GM LS1 Spring High Load Spring
Re: Need Comp Spring Tech Data Please... I think the 941 was discontinued when they came out with the 918 so that info isn't on their website anymore, I'm sure you can find it somewhere though.
