How to remove the pax side rear coil pack bolt...
03-05-2007 | 07:13 AM
#22
I think I still have scars on my hands, Being I am 6' 4" and about 220, I have some big *** hands!!! lol. My son is only 3 and he stays out side with me when I work on my cars and hands me wrenchs, Even if I don't need the wrench, he still trys to help. Its an awesome feeling to see your son wanting to help, even though he isn't.
Lane
Lane
03-05-2007 | 07:38 AM
#23
I had to do it on my friends 98 and after trying many different things, this worked perfect;
I used a short 1/4 drive socket, put a peice of electrical tape on the male end on the socket wrench and just barely put it in the socket. This allowed enough clearance for the socket to go onto the bolt about half way, which is just enough to break it loose and then take it out by your fingers. Ditched it too, but if you wanted to reuse it, just cut the threaded part off and it would be hard to remove.
I used a short 1/4 drive socket, put a peice of electrical tape on the male end on the socket wrench and just barely put it in the socket. This allowed enough clearance for the socket to go onto the bolt about half way, which is just enough to break it loose and then take it out by your fingers. Ditched it too, but if you wanted to reuse it, just cut the threaded part off and it would be hard to remove.
