TR 224 cam install
TR 224 cam install I've got the cam in, the driver side springs done, and the middle 4 on the passenger side. BUT, I lost a key putting the #4 spring on. I have no clue where it is. Where can I get a new one, quickly (Sunday). Also, any hints for doing the back 2 springs?
t.i.a.
t.i.a.
TECH Fanatic
Joined: Feb 2002
Posts: 1,089
Likes: 0
From: New Jersey
Re: TR 224 cam install Well, I can't help you with a keeper for Sunday, but, I can give you some good advise with the rear 2 Pass side spring removal, take off the two heater core hoses that are located on the firewall and that will afford you a little more room to work <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> .
Take your time and good luck!
Joe.
Take your time and good luck!
Joe.
Re: TR 224 cam install The back springs on the passenger side are simple to replace if you build my simple tool described in the link below.
http://www.ls1.com/forums/showthread...threadid=66030
http://www.ls1.com/forums/showthread...threadid=66030
