oange ss

iTrader: (50)

fwiw i put down 412/398 with a conservative N2O tune.....

Xtnct00WS6

iTrader: (8)

With tr224 on 114 and Patriot 243's, I made 401/392 on a mustang dyno with cats and a LS1 intake.

The Alchemist

iTrader: (19)

I currently am dreaming of PtoV... but that's another story, err thread.

67rsss

iTrader: (4)

So how did the PTV check out?

matt1289

with AFR 205cc and a cam close to the same I got some good numbers and amazing torque.

JonCR96Z

iTrader: (33)

If you are too lazy to type your results in your post, then don't post. I hate when people say its in my sig, then a week later change the damn thing.

zman1969

iTrader: (91)

well per TR website this cam on a 112 was 398 h/p and 388 trq with headers , other bolt ons with STOCK heads you should be 420 or so with ported - i would think

dankl

iTrader: (1)

I have those heads and a very similar cam. Cam is 222/224 .566/.568 LSA: 112. My numbers were much lower than I expected. I was expecting a tad over 400 and my mechanic was even more optimistic. He was thinking the 430 mark. We didn't even break 400 to the wheels. Plus I was running out of fuel at higher RPM's, so I had to get a 255 LPH fuel pump. Now I am waiting on my 92/92 combo (being ported by Mamo). Either way, don't be too concerned with dyno numbers, although it is nice to see some nice numbers.

Streetsharkls1

you will see 410rwhp and 385 tq

MannyZ28

iTrader: (1)

Yeah I was hoping that my car would be close to that sample car on their website too....my mods and power are in my sig...

04gtod

iTrader: (3)

I made 405/380 with 224/224 .581 114, Livernois Stage 2 Ls6 heads, LS6 intake with cats.