New dyno numbers for TR224/114
#1
New dyno numbers for TR224/114
Finally got her to the dyno yesterday after the weekend cam swap. Pulled 386rwhp/376rwtq. I was pretty happy with that number, considering it needs tuning bad. A/F was 11.9 at peak hp , and smelled like rotten eggs. Ran the other guys out of the room! Anyway, I will be getting it tuned this Friday, and can anyone give me an estimate of power I will gain from tuning?
Note: peak tq was acheived at 4900 rpm. My factory rev limiter would not let me pull up to the peak power of this cam. At 6200 rpm, the hp curve was still climbing!!!!!DAMN I love this cam.
Note: peak tq was acheived at 4900 rpm. My factory rev limiter would not let me pull up to the peak power of this cam. At 6200 rpm, the hp curve was still climbing!!!!!DAMN I love this cam.
#3
TECH Enthusiast
iTrader: (1)
Join Date: Nov 2001
Location: Atlanta, GA
Posts: 569
Likes: 0
Received 0 Likes
on
0 Posts
Re: New dyno numbers for TR224/114
Congrats, you should be able to get real close or over 400.
Glad to see the high numbers, I just put my TR 224/.561/112 Cam and Rev Valve Train upgrade with TR Harden Pushrods in my SS this weeked with LunaticTA and Hawkman99. I am getting it dyno'ed next Tuesday and hoping for around the same. We also put on a set of FLP LT Headers, high flow cats ( putting straight pipe on for dyno ) and FLP Y-Pipe. Only bummer is now I (HAVE) to get a roll cage to be allowed to run. Oh darn <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
<small>[ October 01, 2002, 02:02 PM: Message edited by: kick_*ss ]</small>
Glad to see the high numbers, I just put my TR 224/.561/112 Cam and Rev Valve Train upgrade with TR Harden Pushrods in my SS this weeked with LunaticTA and Hawkman99. I am getting it dyno'ed next Tuesday and hoping for around the same. We also put on a set of FLP LT Headers, high flow cats ( putting straight pipe on for dyno ) and FLP Y-Pipe. Only bummer is now I (HAVE) to get a roll cage to be allowed to run. Oh darn <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
<small>[ October 01, 2002, 02:02 PM: Message edited by: kick_*ss ]</small>
#5
TECH Enthusiast
iTrader: (10)
Join Date: Aug 2002
Location: Arlington, TX Congestion City
Posts: 720
Likes: 0
Received 1 Like
on
1 Post
Re: New dyno numbers for TR224/114
Sweet! This is the same cam I have and will be getting installed along with SII heads. I am growing inpatient. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> Let us know what the tuning does for you.