milling heads and p/v clearance
TECH Addict
Joined: Dec 2001
Posts: 2,340
Likes: 0
From: Fort Worth,TX
Re: milling heads and p/v clearance </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Grinch:
<strong>with a 226/226 58x 58x 112 XE-R
and heads milled .030 or .040 will i have enuff clearance and what push rods to run????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I know for sure you will be fine with /30thou clearance with that cam.Remember its duration that has to do with p to v clearance.
<strong>with a 226/226 58x 58x 112 XE-R
and heads milled .030 or .040 will i have enuff clearance and what push rods to run????</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I know for sure you will be fine with /30thou clearance with that cam.Remember its duration that has to do with p to v clearance.
