got to dyno finally
Thread Starter
TECH Fanatic
Joined: Nov 2001
Posts: 1,684
Likes: 0
From: Yarmouth, MA
got to dyno finally Well the z only has 800 miles and TEA stage 2s TR 224-114 cam, PT4000, hooker LT's and 3.42 gears..anyway ... 385 tq and 365 hp.. not quite as much as I wanted to see of course..But with only 800 miles on the clock ,I hope 10-15 hp will free up..Also no timing or a/f changes yet..wot was 12.6 but low to mid seemed lean.
1 question to anyone who might give me some help. The HP figures of 365 started at 5100 and stayed there all the way to 6600..Flatline right across the board. I've never seen a flatter line for so long. I figure I can tune that up a little with timing, fuel etc.Let me know what you think.
1 question to anyone who might give me some help. The HP figures of 365 started at 5100 and stayed there all the way to 6600..Flatline right across the board. I've never seen a flatter line for so long. I figure I can tune that up a little with timing, fuel etc.Let me know what you think.
