New mods
#1
New mods
i have a 98 ws6 a4 with 70,000 on it i have a nelson pcm pacesetter long tubes with a y to Borla catback its winter time here so i wanna do some mods what you guys think i can do with about $3000 for mods to make me go faster nelson will re-tune for mods for free. This is a weekend car
#4
MASS seller approved
iTrader: (160)
maybe but that trans will be out in no time with those mods id vote cam,tune intake,cut out, gears 3.73 or 3.90's snd a stall
ps i have 500 in my cam,springs,pushrods and 600 for a fast 90mm intake+200 for a tb
and 550 for my 4k yank stall
a dyno tune is usually 400-600ish
ps i have 500 in my cam,springs,pushrods and 600 for a fast 90mm intake+200 for a tb
and 550 for my 4k yank stall
a dyno tune is usually 400-600ish
#5
Cam- $400>
Heads- $1500(ported LS6's)> or find some 243's on here for less that $1,000
Intake/TB- LS6/ported TB $400> or Fast 92/92 $1300>
Stall- not nedded but will help. a new one $800> or can find a used on for $500>
Tune- free(from what your saying)
FTW.
thats just a rough ballpark range.
Heads- $1500(ported LS6's)> or find some 243's on here for less that $1,000
Intake/TB- LS6/ported TB $400> or Fast 92/92 $1300>
Stall- not nedded but will help. a new one $800> or can find a used on for $500>
Tune- free(from what your saying)
FTW.
thats just a rough ballpark range.
Trending Topics
#10
On The Tree
iTrader: (2)
Join Date: Feb 2009
Location: Ceres,CA
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
I just got a custom grind cam and all the necessary support mods for 1050$ and than bought injectors,trq arm,lca's and brackets,fuel pump and a few more things and im under 2500$ so its very possible to have soem good power for the amount of money but i would definitely suggest gears and suspension if u plan to go faster causeit isnt any good unless its to the ground...spinnin isnt winnin