rod bolts and forged pistons
Thread Starter
single digit dreamer
iTrader: (6)
Joined: Mar 2002
Posts: 9,757
Likes: 4
From: omaha ne
rod bolts and forged pistons are there and tricks to puting in arp rod bolts? or is it a simple tap out the old and torque in the new?
next question, i only have about 10k on my engine but am thinking about some forged pistons, can i get them in a stock bore and avoid the machine work?
next question, i only have about 10k on my engine but am thinking about some forged pistons, can i get them in a stock bore and avoid the machine work?
Staging Lane
Joined: Aug 2002
Posts: 65
Likes: 0
From: Wake Village, TX
Re: rod bolts and forged pistons anytime you install new rod bolts a very very good idea to have them honed...same with the block, when installing new piston you should get the block honed to insure proper cleanrance...depending on the pistons you buy, like the lunati's that come in the LS1's 382 kit they actually come in .005" oversized and you have to get the block honed inorder to have proper clearance...good luck!
<img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
<img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
