CamHelp
Thread Starter
Teching In
Joined: Mar 2007
Posts: 9
Likes: 0
From: Delaware
CamHelp I'm new to the LS1 world, need to how much lift or how big of a cam can I put in my stock 01 LS1 motor (SAFELY). I don't want to fly cut the pistons or any thing like that. Don't want to worry about ptvc. Just want to put in and go. I'm going to buy one from TSP. Can you guys recommend one?
Teching In
Joined: Feb 2007
Posts: 25
Likes: 0
From: Mansfield Massachusetts
If you are going to take the time to replace the cam you should at least do springs pushrods and timing chain while you are in there. Not much $$ in parts and you will have everything apart already.
Thread Starter
Teching In
Joined: Mar 2007
Posts: 9
Likes: 0
From: Delaware
All my cam questions have been answered in this thread, learned that bigger isn't the best! https://ls1tech.com/forums/generation-iii-internal-engine/683617-do-any-shops-market-small-cams-anymore-why-not.html
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
